Update Using Altium authored by Alia Peterson's avatar Alia Peterson
......@@ -93,7 +93,6 @@ Once you have all your components on the schematic, you can connect them using t
Sometimes you need to have routes that are the same length to preserve the signal that passes through it.
To do this:
- In your schematic file, click Place, highlight over Directives, and select Differential Pair.
- Click on the two wires you want to be a differential pair - have the same length - this will leave a little red symbol on each of them.
- Click on the red icons and make sure the labels are the same as each other
......
......