| ... | @@ -76,7 +76,6 @@ Once you have all your components on the schematic, you can connect them using t |
... | @@ -76,7 +76,6 @@ Once you have all your components on the schematic, you can connect them using t |
|
|
<details><summary>Finishing Touches:</summary>
|
|
<details><summary>Finishing Touches:</summary>
|
|
|
|
|
|
|
|
- Traces:
|
|
- Traces:
|
|
|
|
|
|
|
|
- Sometimes you want to use thicker traces. You may want to use this when the trace is for power - like connecting 3.3V or 5V. To change the width of the traces in PCB mode, select the trace you want to edit, then click Tab to make sure it selects the entire trace. Next, open the Properties panel on the right and change the Width (under Properties section) to the size you want (20mil is a good option).
|
|
- Sometimes you want to use thicker traces. You may want to use this when the trace is for power - like connecting 3.3V or 5V. To change the width of the traces in PCB mode, select the trace you want to edit, then click Tab to make sure it selects the entire trace. Next, open the Properties panel on the right and change the Width (under Properties section) to the size you want (20mil is a good option).
|
|
|
- No sharp corners
|
|
- No sharp corners
|
|
|
|
|
|
| ... | | ... | |
