Using-Altium.md

@@ -11,6 +11,7 @@
 1. Make a new schematic file and a new PCB file inside your project (Right click your project in the left panel)
 
 <details><summary>Steps to Make Schematic Document:</summary>
+
 1. To place components - open your schematic file, click on the panels button and select Components.
 1. Click on library
 1. Choose WarnickShareLibrary.SchLib - "J:\groups\warnickshare\AltiumLibraryAndRules\WarnickShareLibrary.SchLib"
@@ -22,6 +23,8 @@
 Once you have all your components on the schematic, you can connect them using the place wire button on the top ribbon.
 1. Place Net Labels - Under Place (top ribbon), select Net Label. Click Tab to edit the net name. Click on the wire you want to name to leave the Net Label there. These are super important! They help establish connections between items. You also need them to do things like differential pair routing.
 1. To place a ground net, click the little red triangle in the workspace ribbon. Be sure to label everything properly.
+</details>
+
 
 <details><summary>Steps for PCB Document:</summary>
 1. Once your schematic is finished, switch to the PCB document. In this document, there are three different ways to view the board.