@@ -82,6 +82,7 @@ Once you have all your components on the schematic, you can connect them using t
1. In the Pad Stack section, change the shape for the top layer to rectangle.
1. Adjust the size to reflect the datasheet’s diagram or description for the footprint.
- When making a component footprint, if you need to place several pads, you can Copy + Paste it onto itself, click edit, move (x, y) to translate it. This helps with getting the measurements right.
1. Add a little dot to indicate which direction to put the chip down. Just Place a circle, you can change the size.