@@ -82,6 +82,7 @@ Once you have all your components on the schematic, you can connect them using t
...
@@ -82,6 +82,7 @@ Once you have all your components on the schematic, you can connect them using t
1. In the Pad Stack section, change the shape for the top layer to rectangle.
1. In the Pad Stack section, change the shape for the top layer to rectangle.
1. Adjust the size to reflect the datasheet’s diagram or description for the footprint.
1. Adjust the size to reflect the datasheet’s diagram or description for the footprint.
- When making a component footprint, if you need to place several pads, you can Copy + Paste it onto itself, click edit, move (x, y) to translate it. This helps with getting the measurements right.
- When making a component footprint, if you need to place several pads, you can Copy + Paste it onto itself, click edit, move (x, y) to translate it. This helps with getting the measurements right.
1. Add a little dot to indicate which direction to put the chip down. Just Place a circle, you can change the size.