Skip to content
GitLab

ARL University Node Instructions · Changes

Page history
Update ARL University Node Instructions authored by Ryan Watson's avatar Ryan Watson
Hide whitespace changes
Inline Side-by-side
ARL-University-Node-Instructions.md
View page @ 1525d1b5
......@@ -16,9 +16,9 @@ Flash the sd card with the dd utility:
Insert the sd card into the rfsoc4x2 and position the adjacent switch to 'SD' so the board knows to boot from the sd card.
# Getting the IP address of the rfsoc4x2
If you know the ip address you can skip this step
With a micro-usb cable, establish a serial connection with the rfsoc4x2
Power on the board, the boot log should appear in the serial connection. After boot is complete, login with user: 'casper', password: 'casper'. Run
If you know the ip address you can skip this step.
With a micro-usb cable, establish a serial connection with the rfsoc4x2.
Power on the board, the boot log should appear in the serial connection. After boot is complete, login with user: 'casper', password: 'casper'. Run,
$ ip addr
......