ARL-University-Node-Instructions.md

@@ -16,9 +16,9 @@ Flash the sd card with the dd utility:
 Insert the sd card into the rfsoc4x2 and position the adjacent switch to 'SD' so the board knows to boot from the sd card. 
 
 # Getting the IP address of the rfsoc4x2
-If you know the ip address you can skip this step
-With a micro-usb cable, establish a serial connection with the rfsoc4x2 
-Power on the board, the boot log should appear in the serial connection. After boot is complete, login with user: 'casper', password: 'casper'. Run 
+If you know the ip address you can skip this step.
+With a micro-usb cable, establish a serial connection with the rfsoc4x2. 
+Power on the board, the boot log should appear in the serial connection. After boot is complete, login with user: 'casper', password: 'casper'. Run,  
 
     $ ip addr