Using-Altium.md

@@ -93,7 +93,6 @@ Once you have all your components on the schematic, you can connect them using t
     Sometimes you need to have routes that are the same length to preserve the signal that passes through it.
 
 To do this:
-    
     - In your schematic file, click Place, highlight over Directives, and select Differential Pair.
     - Click on the two wires you want to be a differential pair - have the same length - this will leave a little red symbol on each of them.
     - Click on the red icons and make sure the labels are the same as each other